|
MOC-300 hopper rotary oven controller
Recommended equipment: hopper rotary oven controller
Characteristic
MOC-300 is a top-grade food machinery hopper rotary oven controller using high performance microcomputer control technology. This controller adopts luxurious super large Digitron display, advanced PID temperature control mode, count-down time control, rich sixteen temperatures, time parameter storage and advanced sectional temperature control. It has beautiful appearance and powerful function, is the best controller of top-grade hopper rotary oven equipment. 1、Function characteristics
1）、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2）、Digitron and indicator light combined display working and alarm state;
3）、16 groups temperature and time baking data storage;
4）、Password setting and data locking avoid operator changing information at will;
5）、PID regulation, fuzzy temperature control mode;
6）、Multiple password protection setting;
7）、Temperature range: 0～500℃;
8）、Range of temperature control: 0～400℃;
9）、Baking setup time 0～99Min 99Sec;
10）、Steam setup time 0～99Sec;
11）、Lighting timing setup 0～9 Min;
12）、Steam throttle valve setup time 0～9 Min;
13）、Temperature error shift correction;
14）、Upper limit temperature deviation setting;
15）、Heating thermal inertia setting;
16）、Upper temperature limit alarm;
17）、Temperature limit alarm;
18）、Thermocouple channels disconnection alarm.
2、Technical parameter
1）、Temperature, baking temperature, steam temperature, storage number and output actions showed respectively on digitron and indicator light.
2）、Output control: (switch output)
Heating relay output one-channel;
Lighting relay output one-channel;
Turntable rotation, ignition relay output one-channel;
Alarm relay output one-channel;
Steam relay output one-channel;
Hopper fast relay output one-channel;
Hopper slow relay output one-channel;
Exhaust valve relay output one-channel;
Standby relay output one-channel.
3）、Input signal (except thermocouple, the input signal disconnection is effective)
K-type thermocouple input one-channel;
Door switch signal input one-channel;
Turntable positioning signal input one-channel;
Ignition failure signal input one-channel;
Turntable overload input one-channel;
Fan overload input one-channel.
4）、Working power: 50～60Hz AC220V±10%.
1、Cautions in installation
1）、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2）、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
Notice: Improper operation may cause hazards, including personal injury or equipment accident.
3）、Please install on metal or other flame retardant matters and away from fuel.
4）、Should be safety grounding when use.
5）、Wiring operation must be done by professional electrician.
6）、After the disconnect power is confirmed, operation could be started.
2、System installation and commissioning
1）、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high, affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2）、It is necessary to avoid controller being installed too close to AC accessories: contactor, transformer, and so on; the controller must be kept away from strong electromagnetic field environment, for avoiding unnecessary interference and affecting the normal work.
3）、Please have regular maintenance to ensure controller works without accident.
3、Iron plate overall dimension, installation drawing
Overall dimension:750mm×150mm
|
