Hotline:400-880-8071

H5-100 time controller

Characteristic
This controller is mainly applied to the time switch controller of multilayer baking oven, will control a maximum of six layer independently. The time is set by week, with simple and convenient operation. The output signal could be level output or pulse output. Six-route output can be controlled independently or be synchronous output by modifying the internal parameter. It has cycle control by one week, can set different daily power on-off time in one week, as well as it can set same daily power on-off time by the internal parameter.

1、Function characteristic
1)、Using high speed CPU chip design, with rapid movement, accurate control and good stability;
2)、Real-time clock, power on time, power off time and output actions showed respectively on digitron and indicator light;
3)、Password setting and data locking avoid operator changing data at will;
4)、It has cycle control by one week, can set different or same daily power on-off time in one week;
5)、The output signal could be level output or pulse output;
6)、Could be six-route synchronous output or independent output;
7)、Could be manual mode or automatic mode;
8)、Real-time clock setting;
9)、Power on-off time setting.

2、Technical parameter
1)、Output control: six-route power on-off signal output; 
        Alarm output one-route;
         External buzzer output one-route;
2)、Time form: Power on time, buzzer resounds 20 Sec;
         Power off time, buzzer resounds 30 Sec;
        At the same time the alarm outputs, and press any key to eliminate;
3)、Working power:50~60Hz AC110V±10% AC220V±10%.

1、Cautions in installation
1)、External power supply have abnormal changes will lead to the breakdown of control system, for the safety work of the whole system, please make sure to set safety circuit outside of the control system.
2)、Operator must acquaint himself with the contents of manual before installation, wiring, operation and maintenance. And operator must know very well related mechanical and electronic common sense and all relevant safety cautions.
Notice: Improper operation may cause hazards, including personal injury or equipment accident.
3)、Please install on metal or other flame retardant matters and away from fuel.
4)、Should be safety grounding when use.
5)、Wiring operation must be done by professional electrician, after the disconnect power is confirmed, operation could be started.

2、System installation and commissioning
1)、Should install electricity box of controller in place with good ventilation, oil-proofing and dust proof. If the electric control box is closed, temperature of controller will be too high,  affect the normal work and the exhaust fan should be installed; the preference temperature of electricity box is below 50℃ and relative humidity less than 85%RH.
2)、It is necessary to avoid controller being installed too close to AC accessories: contactor, transformer, and so on; the controller must be kept away from strong electromagnetic field environment, for avoiding unnecessary interference and affecting the normal work.
3)、Please have regular maintenance to ensure controller works without accident.

3、Iron plate overall dimension, installation drawing

感兴趣的产品: